Introduction to the automatic Nest software of the grid pair of projection
青鹤投影对条对格软件用于将矢量图形通过投影仪投影到切割设备上，与铺平的材料对位排料并切割。投影的同时进行光学畸变校正，还原到1:1，以便于对位切割。对于长幅面的切割设备，为了保证投影精度，支持多投影拼接，理论上不限制投影机数量，并且不限制XY行列数量。
针对不同厚度的材料，为了减小误差，本软件可以自动调整适应，自动计算投影尺寸。
为了提高排料效率，减少人工干预，本软件支持对格对条自动排；支持匀称格及非均匀格子调整、横向及纵向均匀及非均匀一维网格的自动排料。
针对长裁床，本软件支持分区域排料，左排右切左切右排，充分利用切割机减少闲置等待时间。除了适应个性化定制市场，本软件也适用于批量条格面料的服装批量生产，可多件同时排。
本软件在出厂时，分单投影、多投影多厚度、手工排、自动排等版本，具体请咨询本公司。
The projection of the crane's software is used toproject the vector graphics on the projection of the vector graphics to thecutting device, and the material alignment and cutting. Projection of the sametime for optical distortion correction, reduction to 1:1, in order tofacilitate cutting.
For different thickness materials, in order to reduce the error, the software can automatically adjust the adaptation and calculate the projection size.
In order to improve the layout efficiency and reduce manual intervention, the software supports automatic layout of grid-to-bar, uniform grid and non-uniform grid, horizontal and vertical one-dimensional grid.
For long cutting machine, this software supports subregional layout, left and right cutting, left and right cutting, making full use of the cutting machine to reduce idle waiting time.
When the software is out of the factory, it can be divided into single projection, multi-projection, multi-thickness, manual layout, automatic layout and other versions. Please consult our company specifically.
手工排料时支持自动对格：
Support for automatic checking when manually nesting
工作流程：
1、读取样板后，投影到裁床上。支持DXF、CUT 和PLT 的封闭样板。
2、带格子或带花的面料铺在裁床上，必须平整无皱褶。
3、快速网格调整。
4、需要设置配对点的进入界面设置，完毕后自动排料。
5、排料完毕，输出PLT/DXF/CUT格式供切割机切割，同时定位。
多投影拼接时设置投影仪顺序，见下图：
样板投影时，拼接处：
本投影定位排版软件，内含投影光学变形校正功能。校正简便，一次校正后长久使用，不需要多次校正，支持多款投影仪。
This projection positioning layout software, including projection optical deformation correction function. Easy to correct, long-term use after one correction, no multiple corrections required, support for multiple projectors.
校正过程：
强大的兼容、导入/导出功能
能直接导入/导出PLT/DXF/CUT格式的文件。对青鹤样板摄像输入软件完美兼容。
支持的输出设备
各种激光切割机和震动刀、圆刀裁床。
现场效果：
Software characteristics:
a) Support thedeformation recovery capability of ordinary projectors
b) Import slicing datain AAMA format
c) Import generaldrawing DXF pattern data
d) Direct import of PLTsplicing fitting pattern data
e) Compatible withreading clothing CAD output of AAMA-DXF / Plt /CUT files.
f) Support manual tothe lattice row. Support automatic to lattice row, greatly improve workefficiency, improve cloth utilization rate.
g) Supportuniform lattice and uneven lattice manual row and automatic row.
h) Supportmulti-projection splicing.
i) Supportarbitrary lattice adjustment, perfect adaptation to garment factory fabrics.
j) Supportfor lattice pairing point settings.
k) At the same time,support the layout of ordinary materials separated from projectors
h) Support for automatic checking when manually draining
导航设定：上海汽车城地铁站4号口
转载自久章智能（微信公众号，久章智能于 2023-12-18 转载），内容保持原貌，版权归原作者及原账号所有。阅读原文 ↗