Introduction to the automatic Nest software of the grid pair of projection
Qinghe projection strip and grid software is used to project vector graphics onto the cutting equipment through a projector, align them with the flat material, lay out and cut. The optical distortion is corrected during projection and restored to 1:1 to facilitate alignment and cutting. For long-format cutting equipment, in order to ensure projection accuracy, multi-projection splicing is supported. In theory, there is no limit on the number of projectors and no limit on the number of XY rows and columns.
For materials with different thicknesses, in order to reduce errors, this software can automatically adjust and automatically calculate the projection size.
In order to improve the layout efficiency and reduce manual intervention, this software supports automatic layout of grids and strips; supports the adjustment of uniform grids and non-uniform grids, and the automatic layout of horizontally and vertically uniform and non-uniform one-dimensional grids.
For long cutting tables, this software supports area layout, left row cutting and right row cutting, left row cutting and right row cutting, making full use of the cutting machine to reduce idle waiting time. In addition to adapting to the personalized customization market, this software is also suitable for mass production of clothing made of bulk striped fabrics, and multiple pieces can be arranged at the same time.
When this software leaves the factory, it is divided into single projection, multi-projection and multi-thickness, manual arrangement, automatic arrangement and other versions. Please consult our company for details.
The projection of the crane's software is used toproject the vector graphics on the projection of the vector graphics to thecutting device, and the material alignment and cutting. Projection of the sametime for optical distortion correction, reduction to 1:1, in order tofacilitate cutting.
For different thickness materials, in order to reduce the error, the software can automatically adjust the adaptation and calculate the projection size.
In order to improve the layout efficiency and reduce manual intervention, the software supports automatic layout of grid-to-bar, uniform grid and non-uniform grid, horizontal and vertical one-dimensional grid.
For long cutting machine, this software supports subregional layout, left and right cutting, left and right cutting, making full use of the cutting machine to reduce idle waiting time.
When the software is out of the factory, it can be divided into single projection, multi-projection, multi-thickness, manual layout, automatic layout and other versions. Please consult our company specifically.
Supports automatic alignment when manually nesting:
Support for automatic checking when manually nesting
Workflow:
1. After reading the pattern, project it onto the cutting bed. Supports closed templates for DXF, CUT and PLT.
2. Plaid or patterned fabrics must be laid flat and wrinkle-free on the cutting bed.
3. Quick grid adjustment.
4. It is necessary to set the entry interface setting of the pairing point, and the materials will be automatically laid out after completion.
5. After the layout is completed, the PLT/DXF/CUT format is output for cutting by the cutting machine and positioning at the same time.
Set the order of projectors when splicing multiple projections, as shown in the figure below:
When projecting the template, the splicing points are:
This projection positioning and typesetting software includes projection optical deformation correction function. It is easy to calibrate and can be used for a long time after one calibration. It does not require multiple calibrations and supports a variety of projectors.
This projection positioning layout software, including projection optical deformation correction function. Easy to correct, long-term use after one correction, no multiple corrections required, support for multiple projectors.
Calibration process:
Powerful compatibility, import/export functions
Can directly import/export files in PLT/DXF/CUT format. Perfectly compatible with Qinghe sample camera input software.
Supported output devices
Various laser cutting machines, vibrating knives, and circular knife cutting machines.
On-site effect:
Software characteristics:
a) Support thedeformation recovery capability of ordinary projectors
b) Import slicing datain AAMA format
c) Import generaldrawing DXF pattern data
d) Direct import of PLTsplicing fitting pattern data
e) Compatible withreading clothing CAD output of AAMA-DXF / Plt /CUT files.
f) Support manual tothe lattice row. Support automatic to lattice row, greatly improve workefficiency, improve cloth utilization rate.
g) Supportuniform lattice and uneven lattice manual row and automatic row.
h) Supportmulti-projection splicing.
i) Supportarbitrary lattice adjustment, perfect adaptation to garment factory fabrics.
j) Supportfor lattice pairing point settings.
k) At the same time,support the layout of ordinary materials separated from projectors
h) Support for automatic checking when manually draining
Navigation setting: Exit 4 of Shanghai Automobile City Subway Station
Machine-translated from the Chinese original 青鹤投影对格对条自动排料软件介绍(CGPS) (published 2023-12-18). WeChat original ↗